UFO LED Hight Bay Light User Guide

September 1, 2016 by Sarah Longfellow

FacebookTwitterGoogle+PinterestTumblrStumbleUponLinkedInBlogger PostDeliciousDiggShare

Thank You for buying LE UFO LED Hight Bay Light. To Provide an excellent user experience, please install it according to these instructions and then pass the instructions to appropriate person for retention and future reference.

Installation Precautions

  1. Please check the lamp carefully before installing.
  2. This product can only be installed and removed by professionals.
  3. To avoid any hurts fallen lamp, please do not change suspension components at a venture.
  4. Ensure the power is off before wiring and installation.
  5. Please do not retrofit the lamp within the warranty period.
  6. To ensure normal work of the lamp, please use the voltage indicated on the packaging.

Parameter

LED Bay Lights Parameter 1

LED Bay Lights Parameter 2

Components and Structure

LED Bay Lights Components and Structure

Dimensions

LED Bay Lights Dimensions

How to install

Step1:

How to install LED Bay Lights Step1

Install a prepared hook (not included) into the ceiling, and please ensure the installation and the hook can carry at least 3 times the weight of the lamp before installing.

Step2:

How to install LED Bay Lights Step2

Screw the included hanging ring clockwise into the hole on the top of lamp body, and then tighten the hanging ring bolt to ensure the hanging ring won’t come off.

Step3:

How to install LED Bay Lights Step3

Hang the lamp body on the hook, and connect the brown/black line and blue/white line of the AC input line separately with the live line and Neutral line of the mains supply. The yellow-green ground wire must be earthed.

Step4:

How to install LED Bay Lights Step4

To make the lamp dimmable, please connect a 0-10 V dimmer(not included) with the dimming signal line of the lamp, connect the DC + port and DC – port with the corresponding line on the dimmer.

Step5:

How to install LED Bay Lights Step5

After the installation, please confirm whether the wiring is correct. (Caution: Connecting the mains power supply with the dimming signal line will cause fetal damage to the lamp.)

Warm prompt

  1. Please follow the installation instruction above.
  2. To guarantee normal work of the light, please use the voltage indicated on the packaging.
  3. Please turn off the power at first when disassembling the light for other reasons.

General troubleshooting

If installed correctly, please confirm whether caused by following reasons, If still not solved, please stop using immediately and contact professionals or retailer for help.

  1. If the lamp does not work, please cut off the power and then check if the power cord is not connected with utility power properly.
  2. If it is not the reason of a faulty connection, please ask a professional to check whether the voltage is right or other faulty wiring.

LE focus on creating the best lighting experience. If you are interested in lightingever UFO LED Hight Bay Light, Please visit: http://www.lightingever.com/led-bay-light .

Leave a Reply

Your email address will not be published. Required fields are marked *