LED Rope Lights User Guide

August 29, 2016 by Sarah Longfellow

FacebookTwitterGoogle+PinterestTumblrStumbleUponLinkedInBlogger PostDeliciousDiggShare

First,Thank You for buying LE LED Rope Lights. To Provide an excellent user experience, please install it according to these instructions and then pass the instructions to appropriate person for retention and future reference.

Precautions

  1. Please check the LED Rope lights carefully before installing.
  2. Ensure the power is off before wiring and installing.
  3. Please do not retrofit the product within the warranty period.
  4. The product should be installed in places where people cannot reach.
  5. To prevent the product burnout from the heat accumulation, please unfold the product when lighting uo.

Parameter

LED Rope Lights Parameter

Components and Structure

LED Rope Lights Components and Structure

Dimensions

LED Rope Lights Dimensions

How to install

Method one:

Step1:

Unfold the product, and insert the installed power plug into the mains supply to check whether the product works.

Led rope light Step1

Step2:

If the product works perfectly, please cut off the mains supply. Fasten the fixed buckles to the installation positon about every two meters, and then twine the product on it.

Led rope light Step2

Step3:

Insert the power plug into the mains supply, and place the exposed part of the plug into the electric box(not included) to prevent against the rain.

Led rope light Step3

Method two:

Step1:

If 46m is too long for the installation position, you can cut the rope light to appropriate length according to the cutting marks printed on the rope light.

Rope lights Step1

Step2:

Paint a moderate amount of waterproof glue to the end cap(include), and then set the end cap to one end of the rope. Please note: it takes the waterproof glue 4hrs to curing.

Rope lights Step2

Step3:

Unscrew the fixed bolt of the waterproof cable joint and set the bolt to the other end of the rope light. Aim the 2 thrusting needles of the joint at the two copper wires of the rope light and insert them in, and then plug into the mains supply to test whether the rope light can light up. If not, pull out the plug,exchange the 2 contact pins and the plug, paint some waterproof glue around the cable joint, and then tighten the fixed bolt and joint.

Rope lights Step3

Step4:

Fasten the fixed buckles to the installation position ahout ever two meters, and then twine the product on it.

Rope lights Step4

Step5:

Insert the power plug into the mains supply, and place the exposed part of the plug into the electric box(not included) to prevent against the rain.

Rope lights Step5

Routine maintenance

  1. To ensure better lighting, please clean the rope light at regular intervals. If installed outdoors, please regularly check the waterproof measures.
  2. Please make sure the power is off before your maintenance work.
  3. To avoid any damage to the rope light, please do not use chemical solvent during routine maintenance.

LE focus on creating the best lighting experience. If you are interested in lightingever LED Rope Lights, Please visit: http://www.lightingever.com/led-strip-lights .

One thought on “LED Rope Lights User Guide

  1. Ralph Lennon

    I have to cut lights in approx. 25′ lengths and jump one to the other with about a 6″ jumper. They are for my stores windows. Is this possible and do you have the components to do this. Thanks Ralph Lennon

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *