How to Use Pico Bluetooth Mesh Remote Controller

December 3, 2017 by Sarah Longfellow

FacebookTwitterGoogle+PinterestTumblrStumbleUponLinkedInBlogger PostDeliciousDiggShare

Thank you for your purchase. For a better experience, please use remote controller according to the following instructions and retain this manual appropriately for future reference.

 
Bluetooth remote control B1
1. Cell model: 2032
2. Voltage: 3V
3. Distance of control: 25m
4. Product dimension: 105*40*12mm
5. Control function: ON/Off, DIMMING and CCt, RGB control
6. Both remote and smartphone can control the Bluetooth smart devices with Mesh password.
7. Net weight: 30g

 
pico remote controller

 
Bluetooth remote control pair the smart light operation method:
1. Bluetooth remote control can directly control the factory setting products under the name: Mesh, password: 123.
2. If the account and password of the Bluetooth remote control and light are different, users need to set up as below:
• Set new user name and password, e.g. user name: Ashley, password: 123, then log in.
• Press the ON/Off and CCT button at the same time for 5 seconds. Indicator light start flashing, the remote controller enters into setup mode.
• In App, press ”+”, which in the bottom right corner of the first page. Press the useless light icons which will become grey afterwards. Lease the necessary yellow icons then press “Add all” to finish binding. Lastly, press any button of remote control to exit setting mode.

 
How to pair the remote control into a new username:
Long press the ON/Off for 15 seconds. If the indicator light flashes, the remote control successfully restore to factory setting.

 
ilintek remote control

 
Caution:
In order to reduce the battery consumption, please press the remote controller less than 1 second to operate functions instead of pressing long time. Long press a button is no useful for remote control working.

 
app

Leave a Reply

Your email address will not be published. Required fields are marked *