How To Install Lighting EVER LED Tri-Proof Light

June 23, 2017 by Sarah Longfellow

FacebookTwitterGoogle+PinterestTumblrStumbleUponLinkedInBlogger PostDeliciousDiggShare

Install Lighting EVER LED Tri-Proof Light

Parameter

SKU Wattage Input Voltage Frequency Brightness
3700001-DW 40 W 100-240 V AC 50/60 Hz 3300 ml

Components and Structure

LED Tri-Proof Lamp Components and Structure

LED Tri-Proof Lamp Components and Structure 2

Dimension

LED Tri-Proof Lamp Dimension

Flush Mounted

Step1:

flush mounted step 1

According to the screw bits on the lamp, drill two holes in the ceiling. And then insert the plastic screw anchors into the holes.

Step2:

flush mounted step 2

Attach the mounting brackets, washers and screws. Make sure the brackets are tight and secured.

Step3:

flush mounted step 3

Lift the lamp into positon by placing it onto the hook of the bracket. And then tighten the screw into side slot of bracket. Make sure the lamp is well mounted.

Step4:

flush mounted step 4

Pass the power cord through the hole of chassis, and connect the blue wire and brown wire separately into the Neutral line and Live line of mains supply, the yellow-green wire to the Earth.

Suspended

Step1:

Suspended step 1

According to the screw bits on the lamp, drill two holes in the ceiling. And then insert the plastic screw anchors into the holes.

Step2:

Suspended step 2

Divide the griplock mount and grip lock by twisting, and fix the griplock mount into the prepared mounting holes with screw, then twist back the grip locker.

Step3:

Suspended step 3

At the end of the steel cable, attach the lamp onto the hook of the mounting bracket kit. And then tighten the screw into the side slot of bracket.

Step4:

Suspended step 4

Pass the power cord through the hole of chassis, and connect the blue wire and brown wire separately into the Neutral line and Live line of mains supply, the yellow-green wire to the Earth.

General troubleshooting

If the lamp is installed properly, please figure out whether the failure is caused by following situations. If all following resolutions do not work, please stop using immediately and contact professionals or retailers for help.

  1. If the lamp does not work, please cut off the power and then check whether the power cord of lamp is properly connected with mains supply.
  2. If connected properly, please ask a professional to check the input voltage or circuit.

Routine maintenance

  1. To ensure better lighting, please clean the lamp once a year.
  2. Please make sure the power is off before your maintenance work.
  3. To avoid any damage to the lamp, please do not use chemical solvent during routine maintenance.
  4. If you need to replace any components or cords of the lamp, please choose those having the same specifications.

Leave a Reply

Your email address will not be published. Required fields are marked *