Home LED Strip Lighting IdeasHow To Install LED USB Light Strip
How To Install LED USB Light Strip

How To Install LED USB Light Strip

Share

LED Strip Lights

SKU:

4100072-RGB(7W, 1m/3.28ft)

4100073-RGB(10W, 2m/6.56ft)

Specifications

Rated Voltage: 5V DC

Lighting Color: RGB

Power Cord Length: 1m/3.28ft

LED Type: SMD 5050

LED Amount: 30/m (3.28ft)

Water Resistance Rating: IP65

Notes

  1. Do not shape the light strip into sharp angles.
  2. Unroll the light strips before usage due to possible damage because of overheating.
  3. It is not recommended to connect more than 3 meters/9.84ft in series connection.
  4. The light strip can be cut every single LED at the marked line.
  5. Due to the memory function, the RGB light strip will resume previous state automatically.
  6. If the product connects to a USB ouput of a TV, it will turn on/off together with the TV.
  7. Please check the product carefully before installation.

How to use

  1. Use the adhesive tape on a proper surface which should be flat, smooth and clean.
  2. Connect the light strip to the pin-jack properly. Insert the USB plug to a USB power source, and press the  turn on and turn off Key to turn on the light.
  3. Turn off the light strip by long pressing the  turn on and turn off key or pulling out the USB port from the power source directly.
  4. Mode Demo key Press the “Mode/Demo” key to choose from 2 dynamic modes(fade, smooth), long press it to automatically play the 2 dynamic modes in a continuous loop.

Speed mode In dynamic modes, it allows to choose between 8 lighting speeds by pressing the “Speed” key.

Color modes In COLOR modes, it allows to set 8 brightness levels by pressing the “Speed”

Press the key to choose from 16 single-color lightings.

Warranty policy

The product is under warranty for 1 year beginning on the date of purchase. If you require assistance, please contact customer service.

We Provide service for products bought from LE or from certified LE retailers. If you purchased this product elsewhere, please contact the place of purchase to get customer support.

2 thoughts on “How To Install LED USB Light Strip

    1. Dear Glen,
      Thank you for your message.
      As for your question, the light strip is self-adhesive back with adhesive tape but it cannot make a sharp corner, otherwise it will be damaged. I’m sorry that we don’t have corner connector pieces available on our end.
      If you have other question or concern, please feel free to contact us at service@lightingever.com.
      Thanks and regards,
      LE Product Question Team

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.